Project Description
Description
The AVX pneumatic feeders are designed for the transport of materials in granules.
• Easy change material
• Minimizes the use of material in machine
• Low maintenance with no moving parts
• Stainless steel construction
• Low noise emission
• Electronic audible alarm system
Categories
Conveying
Features
The compressed air feeder AVX transfers automatically the material from a container to a hopper or directly to the processing machine, in a simple and silent way.
The material is transferred through the suction tube using compressed air which is applied to the air amplifier venturi.
The airflow causes the material to be dragged from the container to the separator hopper through the flexible tube.
The separator hopper uses cyclone effect to separate conveyed material from the air stream. This falls down until the level detector produces the cut of the solenoid valve which controls the feeding of the compressed air. Transparent tube shows the level of the existing material.
The feeder control incorporates an alarm system for cutting the air fluid after a certain time from the activation of the solenoid.
It also has a setting time delay activation of the solenoid.
Because it does not use electric motor does not require brush changes.
Its stainless steel construction minimizes contamination of the material.
The feeder is supplied complete with filter regulator, suction tubes, and antistatic hose.
Maximum flow 200 kg/h
Max distance. 6 mts
Air consumption max. 250 lpm
Air connection 10 mm
Air pressure 6 bar
